ETOP SHB-E18, User Manual

Page: 63 / 86

SHB-E18 User`s Manual 55
If Parallel Port Mode Select is [EPP] will show:
Phoenix-Award BIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [IrDA]
RxD , TxD Active [Hi, Lo]
IR Transmission Delay [Enabled]
UR2 Duplex Mode [Half]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ EPP ]
EPP Mode Select [1.7]
x ECP Mode Use DMA 3
PWRON After PWR-Fail [Off]
Item Help
Menu Level
►
↑↓← → ：
Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit
F1:General Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default
EPP Mode Select
Select EPP port type 1.7 or 1.9.
The choice: 1.7
(default) , 1.9.
If Parallel Port Mode Select is [ECP] will show:
Phoenix-Award BIOS CMOS Setup Utility
Super IO Device
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
UART Mode Select [IrDA]
RxD , TxD Active [Hi, Lo]
IR Transmission Delay [Enabled]
UR2 Duplex Mode [Half]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [ ECP ]
x EPP Mode Select 1.7
ECP Mode Use DMA [3]
PWRON After PWR-Fail [Off]
Item Help
Menu Level
►
↑↓← → ：
Move Enter: Select +/-/PU/PD: Value F10:Save Esc: Exit
F1:General Help F5:Previous Value F6:Fail-Safe Defaults F7:Optimized Default