2.9 BRAKE SYSTEM
Inspect the front brake lever and cable for excessive
play or other damage.
Replace or repair it if necessary.
Measure the free play of the brake lever at the end of the
brake lever. The standard of free play is 15-25 mm.
There is a parking brake located at
the
rear tire.
I
ts controller is located at the handler bar
on the
right side.
Inspect the rear brake lever and cable for excessive
play or other damage.
Replace or repair if necessary.
Measure the free play of the rear brake lever at the end of
the lever. The standard range is 15-25 mm.
2.10
WHEELS AND TIRES
Inspect the tire surfaces for cuts, nails or other
p
uncturing
objects.
Check the tire surfaces at cold tire condition.
The standard of tire pressure is
3.6±0.4 psi.
(0.25 kgf/cm
2
)
Summary of Contents for VIPER 70
