EN 35
INSTALLATION
▷
Small sinks or basins are not suitable for draining the water. The
water could overflow!
▷
The drain hose can drain water up and down. The drain hose
should be placed no higher than 100 cm and no lower than
60 cm.
▷
The end of the drain hose should not hang in the water that is
being pumped away. Otherwise water could be sucked back into
the appliance!
▷
If the drain hose is too long, then do not force it into the washing
machine. This causes unwanted noises.
Attention! The drain hose should never be kinked.
Electrical connection
• When you use the heating function, the washing machine has
a maximum charge of 10 A. Make sure the circuit(s) cannot be
overloaded and that it has a 16 A fuse.
• Plug the plug into a socket, which has been properly fitted and
earthed.
• Make sure your domestic mains voltage is equal to the values on
the energy label.
• Do not use multi-gang adapters as an extension lead.
• Never insert the plug or remove it into or from the mains socket
with wet hands.
• When plugging and unplugging the plug, hold the plug firmly and
then remove it.
• If the mains lead is damaged, it must be replaced.
Warning
• The washing machine must be connected to an
earthed plug
socket
. This washing machine is fitted with a mains lead with an
earthed plug.
• The washing machine must be connected to a dedicated circuit.
Otherwise, the fuse may blow.
• Make sure the connecting lead remains intact at all times.
