EN 30
Troubleshooting
Fault code
Description
Cause
Solution
E1
Problem with door lock.
The door is not closed
properly.
Restart the program
after the door has been
closed. Call the service
line if the problem
persists.
E2
Water fill problem during
the wash (the water
fill takes longer than
5 minutes).
The tap has not been
opened (sufficiently).
The inlet valve is
blocked.
Open the tap or wait until
the water fill
is once again normal.
Check the filter for the
inlet valve.
Pull the fill hose straight.
Check other taps in the
room.
Call the service line if the
problem persists.
E3
Drainage problem
during washing
(The drainage time takes
longer than 7 minutes).
The drain hose is
blocked or twisted.
Drain pump is blocked.
Clean the drain hose and
pull it straight.
Clean the filter in the
drain pump.
Call the service line if the
problem persists.
E8
Excessive foaming.
Too much detergent is
being used.
Improper use of
detergent.
Use less detergent.
Only use detergents that
are intended for machine
washing (and follow
the instructions on the
packing).
Call the service line if the
problem persists.
FAULTS
