EN 16
• Warnings about spinning:
▷
Spinning normal washing: the water is drained through the drain
hose.
▷
Spinning waterproof clothing and fibre products: when spinning
all of the water collects in the middle, the washing machine can
start to 'walk' and vibrate, and this can seriously damage the
fabrics and the washing machine.
The first wash
Before you start to use the washing machine, the washing machine
must complete a wash at the highest temperature and with an empty
drum. Proceed as follows:
1. Connect the machine to the mains power supply.
2. Open the tap fully and check that the fill and drain pipes are
connected.
3. Pour a little detergent into the detergent drawer and close it.
4. Select 'Cotton 90°'.
5. Press the Start/Pause button.
The LED above the Start/Pause button lights up; the selected
program starts.
▷
EWM126L/EWM146L: the remaining program time is shown on
the display.
▷
EWM125B/EWM146B: the LEDs above 'Wash/Rinse/Spin'
indicate at what stage the program is.
▷
When the program has completely finished, the LED above the
Start/Pause button goes out.
Completing a wash program
1. Connect the machine to the mains power supply.
2. Open the tap fully.
3. Fill the washing machine with laundry.
4. Put detergent into the detergent dispenser:
▷
Pull the drawer out.
▷
Put prewash detergent in compartment I.
▷
Put main wash detergent in compartment II.
▷
Put fabric softener in the 'flower’ compartment.
I
II
OPERATION
