EN 8
When you connect the appliance to the mains electricity for the first time, the DISPLAY
lights up. After three seconds the clock symbol and ‘12:00’ flash on the DISPLAY.
Setting the clock
Press the settings button
‘increase’ and the selection button
simultaneously . ‘12’ starts flashing .
Use the settings buttons to set the hour .
Press the selection button again . ‘00’
will start flashing .
Use the settings buttons to set
the minutes .
Press the selection button again .
Note
If you press a button, the setting starts to flash . You can now change the setting . You can only
change the setting if it is flashing . If it stops flashing, you must press the button so that the
setting starts flashing again .
1
2
3
4
5
SETTING THE CLOCK
