EW50 Industrial LTE Cellular Gateway
45
2.2 LAN & VLAN
This section describes the configuration of LAN and VLAN. VLAN is an optional feature, and its presence
depends on the gateway model.
2.2.1 Ethernet LAN
The Local Area Network (LAN) can be
used to share data or files among
computers attached to a network. The
following diagram illustrates a network
of wired and interconnected computers.
Follow the following instructions to set up an IPv4 Ethernet LAN.
Configuration
Item
Value setting
Description
IP Mode
N/A
It shows the LAN IP mode for the gateway.
Static IP
: If there is at least one WAN interface activated, the LAN IP mode is
fixed in Static IP mode.
Dynamic IP
: If all the available WAN inferfaces are disabled, the LAN IP mode
can be Dynamic IP mode.
LAN IP
Address
1. Required setting
2. 192.168.123.254 is set by
default
Enter the local IP address of this device.
The network device(s) on your network must use the LAN IP address of this
device as their Default Gateway. You can change it if necessary.
Note
:
This is also the IP address of the web UI. If you change it, you will need to
enter the new IP address in the browser in order to see the web UI
.
Subnet Mask
1. Required setting
2.
255.255.255.0 (/24)
is set
by default
Select the subnet mask for this gateway from the dropdown list.
Subnet mask defines how many clients are allowed in one network or subnet.
The default subnet mask is 255.255.255.0 (/24), and it means maximum 254 IP
