EW50 Industrial LTE Cellular Gateway
264
Once you have enabled the Packet Analyzer function on specific Interface(s), you can further specify some
filter rules to capture the packets which match the rules.
Capture Fitters
Item
Value setting
Description
Filter
Optional setting
Check
Enable
box to activate the Capture Filter function.
Source MACs
Optional setting
Define the filter rule with
Source MACs
, the source MAC address of packets.
Packets which match the rule will be captured.
Up to 10 MACs are supported, but they must be separated with “
;”
,
e.g. AA:BB:CC:DD:EE:FF; 11:22:33:44:55:66
The packets will be captured when matching any one MAC in the rule.
Source IPs
Optional setting
Define the filter rule with
Source IPs
, the source IP address of packets.
Packets which match the rule will be captured.
Up to 10 IPs are supported, but they must be separated with “
;”
,
e.g. 192.168.1.1; 192.168.1.2
The packets will be captured when any IP is matched.
Source Ports
Optional setting
Define the filter rule with
Source Ports
, which means the source port of packets.
The packets will be captured when any port is matched.