EtherWAN EW50 User Manual Download Page 285

Page: 285 / 320

EW50 Industrial LTE Cellular Gateway

285

Enable

Unchecked by default

Click

Enable

box to activate this account.

Save

Click the

Save

button to save the configuration.

Create / Edit Email Service Account

Set up the Em

ail Service Account for event notification. It supports up to a maximum of 5 accounts.

You can click the

Add / Edit

button to configure the Email account.

Email Service Configuration
Item

Value setting

Description

Email Server

--- Option ---

Select an Email Server profile from

External Server

setting for the email account

setting.

Email
Addresses

1. Internet E-mail address
format
2. Required setting

Specify the Destination Email Addresses.

Enable

Unchecked by default

Click

Enable

box to activate this account.

Save

Click the

Save

button to save the configuration

Summary of Contents for EW50

































































































































































































































































































































Search results

Summary of Contents for EW50

Reviews:

EtherWAN EW50, User Manual, Page: 285 / 320

Search results

Summary of Contents for EW50

Reviews: