Fig. 8:
Tile drill holes for dummy screws
Towel rail
Fig. 7:
Grid heating mat
Dummy screws
Perforations in tiles for dummy screws
Fig. 9:
Tile drill holes for dummy screws
Towel rail
6�5 Applying protective coating to grid heating mat
(1) Apply the protective layer for the grid
heating mat
with flexible adhesive or
clay plaster.
(2) Apply textile glass grille as plaster re-
inforcement over the entire grid heating
mat
. There needs to be an overhang of
25 cm all-round, 40 cm in the case of clay
plaster.
(3) The reinforcement of plasters serves
to restrict cracks to a harmless level. It
cannot completely prevent the formation
of cracks, but it can prevent their harmful
effects (see ÖNORM B 3346, point 6.3.6).
6�6 Placing the tiles in position
(1) Drill two holes in the tiles at dummy
screw level
.
(2)
Apply the last and final layer of plaster or
flexible adhesive with the tiles, drilling the
holes
through the dummy screws
.
6�7 Installing the towel rail
(1) After tiling,
remove the dummy screws from the tile
holes
.
(2) Insert the towel rail
through the tile
holes
.
The assembly instructions for the towel
rail can be found in the appendix.
22
22
