6 INSTALLATION INSTRUTIONS
6�1 Installing the mounting rail
(1) Take out the wall for the mounting rail
(recommended in the upper part of the
heating mat).
(2) Mount the mounting rail
in the recess
created. Fasten with 6 screws
.
(3) Insert 2 dummy screws per towel rail next
to each other into the rail holes in the
desired position
(optional positions
).
Up to 4 towel rails can be mounted.
(I.e. up to 8 dummy screws).
6�2 Installing the insulation panels
(1) Make 2 drill holes
in one of the two
insulation panels for dummy screws
.
› Make the drill holes to the side (later, the
heating mat must not cover these bore-
holes).
(2)
Apply flexible adhesive to the insulation
panels.
(3)
Affix insulation panels on the wall seam
-
lessly one above the other. The narrower
side faces upwards. (Drill the boreholes
via the dummy screws
).
Fig. 4:
Drill holes on insulation panel
Dummy screws
Fig. 3:
Screws for mounting rail
Position of dummy screws
Optional positions for dummy screws
Fig. 2:
Recess for mounting rail
Mounting rail
20
20
