Etherma eNEXHO-CI Assembly And Operating Instructions Manual Download Page 11

 11

A s s e m b ly   A n d   o p e r A t i n g   i n s t r u c t i o n s   |   e n e x h o - c i   –   i n d o o r   c A m e r A

If your camera is located in a place with a stable environment 
and false alarms do not usually occur, you can set the camera 
to send an e-mail with a 6 pictures sequence in case of an int-
rusion is detected.

You can configure up to 4 addresses. Run the application and 
go to "Security systems". Within this menu, select the "Confi

-

gure" tab. Enter the security password (default 0000) if the app 
requested.

Choose the "Edit installed sensors" option and then the camera 

you want to configure.

At the bottom you can see four buttons, press the e-mail confi

-

guration 

 button.

Press the "+" symbol to add a new mail address. Remember to 
press "Save" before exiting the menu.

If for some reason you want to keep active the presence se-
curity, but not the presence detectors of the cameras, except 
in certain scheduled slots, you can schedule those slots in the 

"Schedule" section of the cameras configuration.

Run the application and go to "Security systems". Within this 

menu, select the "Configure" tab. Enter the security password 

(default 0000) if the app requested.

Choose the "Edit installed sensors" option and then the camera 

you want to configure.

In the middle of the screen there is a "Schedule" button. Press 
it. Then choose the days of the week and later the slots in which 
you allow the detection by the camera.

In order to reset to factory defaults the camera, keep pressed 
the reset button at least 30 seconds. The button is at the bot-
tom of the camera (marked as RESET). 

Wait until the camera start to move. Once the movement fini

-

shes, unplug it from the power and after a few seconds plug it 
again.

This functionality is not under the supervision of the 

parameters set at "Camera alerts configuration". If a 

detection occurs the camera will send a mail regardless the 

number of simultaneous detections set in the configuration.

Schedules are only processed if the security is active 
in the camera zone.

H o W   t o   C o n f i g u r E   t H E   C A m E r A   t o   S E n D   E - m A i l S   o n   A l E r t S ?

H o W   t o   S C H E D u l E   t H E   D E t E C t i o n   f u n C t i o n A l i t y   o f   t H E   C A m E r A S ?

H o W   t o   r E S E t   t H E   C A m E r A   t o   f A C t o r y   D E f A u lt S ?

WHEn troublESHooting

plEASE ContACt tHE CuStomEr CArE of your SpECiAliSt DEAlEr.

IndIcatIon: 

Subject to technical modifications. Changes, errors and misprints shall not be entitled to compensation.

WarnIng: 

Electrical and electronic appliances often contain prescious materials. But they can also contain harmful substances that were 

necessary for their function and safety. They can harm the environment if disposed or mishandled. Please help to protect our environment! 
Therefore do not dispose of this device in the residual waste. Dispose of this unit in accordance with local regulations. Dispose of the packaging 
materials, replacement parts or equipment parts properly.

Summary of Contents for eNEXHO-CI













Reviews: