Etdoor ET-1000E, Installation Instructions And User Manual

Page: 19 / 19

Technical specifications
Power Input: 150W; 220
– 240 V AC, 50Hz or 110 - 120V AC, 60Hz
(subject to customer
’s area)
Motor: 40W
Light time: 3 minutes
Working temperature: -20° ~ 40°C
Relative Humidity: <90%
Max force: 600N
Rated load: 300N
Reception frequency: 433.92 MHz or according to customer
’s requirement
Sensitivity: >1 V for correct receiver signal
Decoding: Rolling code
Transmitter power: 23A 12V Battery
Lamp: LED, 24V DC
Final notes
This manual is only used by technical persons who are qualified to carry out the
installation.
No given information in this manual can be considered of any interest to the end user.
It is important for the installer to show their clients correct operation using of the opener
including the using of manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially
regarding a regular check of the safety and reversing devices.
Important information for the user
Once the opener has been installed, the user must be informed about how it works and all the
risks that can arise if it is used improperly. The user must avoid placing himself/herself in
dangerous situations such
as standing within the door’s operating range when it is moving.
Do not
let children play near the door, and keep the remote controls out of their reach.
All services, repairs or checks must be carried out by professionally qualified persons, and
noted on a maintenance register kept by the user.
IMPORTANT NOTE:
In the case of a malfunction the user must call an authorized installer and
should not attempt to repair it by yourself.