•
Use
[PAGE]
or the encoder to scroll to the
P02
Preset test
menu
[EDIT]
takes you to the menu where you actually make the settings.
Value range weighting:
0%
through
100%
Factory setting:
0%
Test
preset 1 : 0%
Changes/settings take effect immediately. The presets are output parallel to the control level via
DMX/Ethernet (HTP merging, Highest Takes Precedence).
When you exit edit mode, the presets will cease to be output, all of the weighting values you have
entered will be deleted (
[ESC]
or
[PAGE]
).
The current dimmer values can be saved as a new preset at any time. Any combination of existing cues
can be saved as a new preset.
Edit modes
To allow you to make the various possible settings there are two different edit modes which may be
called in succession by repeatedly pressing the
[EDIT]
button (Edit LED is illuminated).
(A)
Selecting presets
Identified by: Preset number flashes.
[ESC]
Exits edit mode, takes you back to the start menu
P02
Preset test
. Any locally set
weighting information is deleted.
[PAGE]
Takes you to the
P03
Preset fade times
. Any locally set weighting information is
deleted.
[EDIT]
Calls edit mode (B) (setting the weighting).
[SAVE]
Takes you to the
P01
Preset
menu, where you can save the current dimmer values as
presets.
<Encoder> Selects the preset.
(B)
Changing the weighting
Identified by: Weighting value flashes.
[ESC]
Exits edit mode, takes you back to the start menu P02 Preset test. Any locally set
weighting information is deleted.
[PAGE]
Takes you to the P03 Preset fade times. Any locally set weighting information is
deleted.
[EDIT]
Calls edit mode (A) (selecting the preset).
[SAVE]
Takes you to the P01 Preset menu. There you can save the current dimmer values as
presets...
<Encoder> Changes the weighting value.
By alternately modifying presets and weighting you can fade in additional saved presets simultaneously.
P03, Preset fade times
In the
P03
Preset fade times
menu you can set the fade in and fade out
times separately for each preset.
Preset fade P03
times
[EDIT]
Open
•
Hit the
[ESC]
button until the main menu appears
•
Use
[PAGE]
or the encoder to scroll to the
M08
Preset
menu
•
[EDIT]
takes you to the most recently called Preset menu
P0X
.
•
Use
[PAGE]
or the encoder to scroll to the
P03
Test preset
menu
[EDIT]
takes you to the settings menu.
Value range: 0.0 seconds …60 minutes
Factory setting:
0.0s
Fade in/out P03
P1 : 1.5s/ 20s
Fade in/out P03
P1 : 45s/ 5’
– 22 –
FDX2000 Vers. 4.0.0
