M05, Dimmer control on/off.
Switches the dimmer control on or off.
Options:
on, off
Factory setting:
on
Dimmer M05
control on
The sliding switch on the front panel will also switch the dimmer control on or off.
The position of the sliding switch has priority.
So, for example, if the sliding switch is set to OFF, dimmer control is deactivated even if
on
has been
selected in the
M05
Dimmer control
menu
M06, Top level menu, dimmer parameters
[EDIT]
takes you to a group of menus that can be
used
to set parameters
for the individual dimmer channels (e.g. curves)
See page 11.
Dimmer M06
submenu
[EDIT]
M07, Top level menu, System
[EDIT]
takes you to a group of menus that can be used to set system
parameters for the cabinet (e. g. behavior of dimmer in the event of
control signal failure, Network settings).
See page 17.
System M07
submenu
[EDIT]
M08, Top level menu, preset settings
[EDIT]
takes you to a group of menus that can be used to set presets and
their behavior.
See page 21.
Preset M08
submenu
[EDIT]
M09, Display language
Options:
Deutsch, English, Nederlands
Factory setting:
Deutsch
Language M09
English
M10, LCD contrast
Value range:
0%
through
100%
Factory setting:
50%
LCD M10
contrast: 100%
M11, Dimmer values
Line 1 displays dimmer numbers
Line 2 displays active values and dimmer errors
1 2 3 4 M11
20 32 FF 0 [Ed]
[EDIT]
: Change channel numbers with encoder.
Input voltage and frequency
The current values of the three phase voltages and the frequency are
displayed.
L1:232V L2:232V
L3:233V f:50.0Hz
Software version
This information will also be shown for two seconds when the device is
started up.
FDX2000
Vers. 1.18.1
FDX2000 Vers. 4.0.0
– 9 –
