Working with FDX2000
Settings
Global settings for the whole cabinet:
•
Selecting and combining the signal sources
•
DMX start address or single channel patch
•
COM-address
•
Network settings, DMX protocol
•
Dimmer control on/off
•
Number of Dimmers within the cabinet
•
Selection of behavior in the event that the DMX signal fails
•
Global feedback on/off
•
Temperature monitoring
•
Display contrast, language
•
Local presets
•
Changing an individual dimmer value
Settings per dimmer:
•
Type of dimmer
•
Dimmer curve
•
Maximum output voltage
•
Preheat
•
Limit [%]
•
Follow-up time for intensity changes
•
Switch points for switch curve
•
Assignment of external signals
•
Type of and individual feedback on/off
•
Local dimmer control
•
16bit control
Power on
As soon as the power (at least one phase) has been switched on, the
dimmer processor starts up and the display shows the software version
for a couple of seconds. Then the main menu appears.
FDX2000
Vers. 3.0.0
ion
DMX:A B COM: ok
ETH: ok DIM: ok
– 6 –
FDX2000 Vers. 4.0.0
