3
Net3 Four Port Gateway Setup Guide
Section 1:
Gateway Hardware
Front Panel Layout
Rear Panel Layout
Push
Ethernet connection supports:
• EtherCon™ locking connector
• PoE (IEEE 802.3af)
• 10/100Mbps data speeds
• Auto-sensing
• Auto-negotiation.
Reset button to hard
reboot the Gateway
(this button is recessed)
The LCD button activates the
backlight (depending on the
mode) as well as advances
through display pages
LCD display. The exact content changes by mode
and software version but generally contains
information about status, configuration and the
software that is currently active in the Gateway
Blue LED
• On indicates power
Green LED
• On indicates network connection
• Flashing indicates network activity
Blank plate
Blue LED
• On indicates power
Green LED
• On indicates network connection
• Flashing indicates network activity
Four module bays (each
with a retaining screw)
DMX Out (XLR Fem)
module
DMX In (XLR Male)
module
Terminal strip module
DC power input
• 8-28Vdc
• Positive tip
• 3.5mm barrel
• 5 watts usage
The modules shown are to illustrate the different types available.
Port #1
Port #2
Port #3
Port #4
Strain relief clip for
dc power cable
Grounding
post
