9
Net3 Four Port Gateway Setup Guide
Section 4:
DMX Front Panel Kits (optional)
This is a simple way to get front access to the DMX XLR 5-pin connectors on a Net3 Four
Port Gateway in a rack. There are two kits These kits are intended to be used in
combination with a Net3 Four Port Gateway and a Rack Mount Kit (4260K1001) which are
not included in this kit.
The rack mount bracket (4260A3010)
can hold up to two of the following in any
combination: Net3 Gateway, DMX Front
Panel Kit or blanking plate (shown).
The XLR blanking plate (4260A3013) is
used when you fewer than four DMX
connectors on the front panel.
The XLR bracket (4260A3012 with 4260A4004 graphic overlay) is intended
to be mounted in a Rack Mount Kit and can be used in any combination with
Net3 Gateways or additional DMX Front Panel Kits
Eight screws (HWM1133) are provided to secure the panel mount XLR
connectors to the XLR bracket.
