Rack Mount Kit-4260K1001 (optional)
8
Section 3:
Rack Mount Kit-4260K1001 (optional)
The Net3 Gateway Rack Mount Kit is capable of holding up to two Net3 Gateways for
mounting in a standard 19” rack enclosure. If you only need to mount a single unit, there is
a blanking plate included in the kit. This blanking plate can be installed on either side of the
rack mount bracket.
Four screws (HW467) are provided
for securing the rack mount bracket
into a standard 19” rack.
Four screws (HW245) are provided for
securing the Gateway(s) or blanking
plate to the rack mount bracket.
The rack mount bracket (4260A3010)
can hold up to two of the following in any
combination: Net3 Gateway, DMX Front
Panel Kit or blanking plate (shown).
The blanking plate (4260A3009) is
used when you only want to put one
Net3 Gateway in a rack mount kit.
