13
Net3 Four Port Gateway Setup Guide
Appendix A: Specifications
Net3 Four Port Gateway Control Features
•
Distributes DMX over Ethernet
•
Supports ETCNet2 and Net3/ACN protocols
•
Distributes DMX data to any input/output device such as dimmers, scrollers, moving
lights and DMX consoles
•
Modular DMX/RDM port design allowing easy configuration of port connector type and
replacement
•
DMX512 via XLR 5-pin Male, XLR 5-pin Female, RJ45 and terminal strip connectors
•
LCD screen for labeling, status and configuration indicators
•
LED power and network indicators
•
Supports Power over Ethernet (PoE) and an external DC power supply
•
Versatile compact size
•
Configurable via Network Configuration Editor software (NCE) or directly through ACN
Net3 Four Port Gateway Specification
General
•
USITT DMX512/512A and ESTA ACN standards supported
•
Supports ETCNet2 and Net3/ACN protocols
•
ETL/cETL approved (Tested to UL Standards by ETL)
Network
•
Complies with IEEE 802.3i for 10BASE-T, 802.3u for 100BASE-TX and 802.3af for
Power over Ethernet specifications
•
Data transport utilizes TCP/IP suite of protocols
•
Distributes DMX over Ethernet to any input/output device such as dimmers, scrollers,
moving lights
•
2048 DMX In or DMX Out channels
•
Configurable to over 32,000 EDMX addresses (Running ETCNet2 software)
Mechanical
•
1U rack height; 1/2 rack width allows for greater density (8 DMX ports in 1U)
•
Fabricated of 16-gauge steel, finished in fine-texture, scratch-resistant, black powder
coat
•
8.5” x 8” x 1.75” / 216mm x 203mm x 45mm (W x D x H with modules installed)
•
Hanging Bracket allows mounting in 3 orientations (U-bolt option)
•
Single UTP Ethernet jack on front of unit
•
Backlit graphic LCD display for identification (soft-labeling) and status reporting:
•
Gateway identification - IP address, software version
