12
Irideon WLZ User Manual
2. Are you flush-mounting the fixture or surface-mounting the
fixture?
•
Flush-mounting: Using the mounting plate bolts, secure the
mounting plate to the installed back box.
•
Surface-mounting: Position the cover plate on top of the
mounting plate before wiring the fixture. The cover plate is
required when the interior of the canopy enclosure could be
exposed after installation with only the mounting plate (the
mounting surface is smaller than the canopy enclosure).
1
1
2
2
Mounting plate
(0–10 V and DALI variants)
Canopy
bolt hole
3
3
For this
structure...
...secure mounting
plate using:
4-11/16 in
back box
Large oval slots
(see 1 at left)
4 in back box
Small oval slots
(see 2 at left)
Mud ring and
round box
Circular slots
(see 3 at left)
3.
Hook
Use the hook in the canopy enclosure to
hang the fixture from the mounting plate
while you complete the fixture wiring.
4. Connect the building ground wire to the
ground wire on the fixture, following
local electrical codes.
5. Connect the supply power wires to the fixture wiring using the
included WAGO
®
connectors.
•
For 120 V fixtures: Connect the black wire to line and the white
wire to neutral.
•
For 230 V fixtures: Connect the brown wire to line and the blue
wire to neutral.