294
Insight 2x user manual
Setting Multiplex mode
If your console is controlling an ETC Sensor dimming system that utilizes
ETC’s Multiplex dimming, specify this in the I/O Configuration screen.
Warning: Changing a port to or from Multiplex mode resets your patch.
To configure your system for the type of fixtures you have, follow these
steps:
1.
Press [Setup] to display the Setup Menu.
2.
Press [2],
Input/Output Configuration
, and press [Enter].
3.
Press [S1],
DMX512 Port
, enter the port to configure (port 1, 2 or 3),
and press [Enter]. You may also use [
↓
] to select a port.
4.
Press [S2],
DMX512 Mode
.
5.
Press [1] to set the port for Multiplex mode or [0] to set the port for
normal mode.
6.
Press [Enter] twice to confirm your choice
.
7.
Console indicates mode as either
Normal
or
Multiplex
.
Note: If you use multiplexed fixtures, you cannot set the ports’ starting
DMX512 numbers.
Setting DMX512 speed
If your console is controlling a dimming system that requires a slower
DMX512 signal, specify this in the I/O Configuration screen
Insight 2x is designed to run at the highest rate provided for in DMX512
specifications. Some dimming systems (including some Colortran ENR™
dimmers) may require a signal slower than the full DMX512 specification.
If this proves necessary, you may reset the console’s signal speed.
Speed choices are
Slow
,
Medium
,
Fast
, and
Max
. Insight 2x normally
runs at
Max
. If you have problems with outputs flashing, fades not run-
ning smoothly, or unselected dimmers rising spontaneously, experiment
with slower speeds until the symptoms disappear. If the symptoms per-
sist, please contact ETC Technical Services at 800/775-4382.
To reset Insight 2x’s DMX512 signal speed, follow these steps:
1.
Press [Setup] to display the Setup Menu.
2.
Select 2,
Input/Output Configuration
, and press [Enter].
3.
Press [S4],
DMX512 Speed
.
4.
Press [0] for
Max
, [1] for
Fast
, [2] for
Medium
, or [3] for
Slow
. The
speed you choose appears in the upper right corner of the display.
5.
Press [Enter] to confirm your choice.
6.
Display indicates new speed setting.
Summary of Contents for Insight 2x
