manualshive.com logo in svg

ETC Insight 2x, User Manual, Page: 178 / 386

Share
Download
ETC Insight 2x User Manual Download Page 178

166

Insight 2x user manual

Creating macros

There are two ways to create a macro. You can create it in Macro display 
mode, entering and editing keystrokes without actually executing the 
instructions, or you can use Insight 2x’s

 Learn mode to record a sequence 

of keystrokes as you perform the operation. 

You can include any key or button on the console except [Enter Macro] in 
a macro

. You cannot enter slider settings or wheel movements. Each 

macro can contain up to 50 keystrokes

. In addition, you can link macros.

Using Learn

Insight 2x’s Learn function allows you to create a macro by performing an 
actual sequence of keystrokes. Insight 2x records the keystrokes as you 
make them. The recorded keystroke sequence can then be rerun by 
pressing the appropriate macro key. Once you record a macro in Learn 
mode you can edit the sequence in Macro mode to adjust its operation. 
Learn works in any display mode except the Macro Editing display and the 
Designer’s Worksheet Editing display.

To create a sample macro using Learn, follow these steps:

Keystrokes:

Action:

1.

Press [Stage]. 

Selects Live display mode

2.

Press [Learn].

Prompt reads: 

Select macro number to learn, then 
press ENTER
To cancel, press CLEAR

3.

Press [7] [Enter].

Learning Macro 7 

flashes in red in the 

upper left corner of the monitor
Prompt reads: 

Select operation(s) for this macro – 
press ENTER MACRO when done 
(Wheels and sliders are not valid 
entries in macros)

4.

Enter [Channel] [1] [Thru] 
[5] [At] [5] [Enter].

Sets channels 1 through 5 at 50 
percent

5.

Press [Macro

 

Wait].

Prompt reads: 

Enter wait time
Press ENTER when done

6.

Press [5] [Enter].

Inserts a five second wait into the 
macro
Prompt reads: 

Select operation(s) for this macro – 
press ENTER MACRO when done 
(Wheels and sliders are not valid 
entries in macros)

7.

Enter [Channel] [1] [Thru] 
[1][0] [Full].

Sets channels 1 through 10 at Full

8.

Press [Macro Wait].

Prompt reads: 

Enter wait time
Press ENTER when done

Summary of Contents for Insight 2x



































































































































































































































































































































































































Reviews:

No comments