ETC Insight 2x, User Manual, Page: 184 / 386

172 Insight 2x user manual
Playing macros
As a macro runs, the LED in the macro’s key flashes. Only one macro may
run at a time.
To run macros 1 through 5, press the appropriate macro key. For example,
to run macro 1, press [M1].
To play a macro recorded in [M1] - [M5], follow these steps:
To run any other macro, press [M*], the number of the macro, and [Enter].
For example, to run macro 10, press [M*] [1][0] [Enter].
To play a macro without its own key, follow these steps:
Canceling a macro
To cancel a running macro, press any other macro key.
Powerup macro
You may select a macro to run automatically each time you turn your con-
sole on. To do so, follow these steps:
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [M#]. Macro runs; prompt shows sequence of
activity as if you were entering the key-
strokes
Keystrokes: Action:
1. Press [Stage]. Selects Stage display mode
2. Press [M*] and enter the
macro number. Prompt reads: Select macro number,
then press ENTER
3. Press [Enter]. Macro runs; prompt shows sequence of
activity as if you were entering the key-
strokes
Keystrokes: Action:
1. Press [Setup]. Selects the Setup menu
2. Press [6] [Enter]. Selects the Options Settings menu
3. Press [1][0] [Enter]. Selects the Powerup Macro option
Prompt reads:
Select powerup macro
number (Enter 0 to disable)
4. Press [2][0] [Enter]. Selects macro 20 as your powerup
macro. Each time you turn on the con-
sole, macro 20 runs