manualshive.com logo in svg

ETC Insight 2x, User Manual, Page: 227 / 386

Share
Download
ETC Insight 2x User Manual Download Page 227

chapter 19 
sensor dimming

Insight 2x lighting control systems may be connected to ETC Sensor dim-
ming systems via the ETCLink communication network. In this configura-
tion, the Insight 2x can provide you with a wide range of system status 
information, including overall system status and specific information 
about individual dimmer modules and dimmer racks. 

You may access ETCLink through the ETCLink Functions menu. Most 
of the dimmer, rack and system information accessible through Insight 
2x

 displays is also available from your Sensor dimming system through 

the Control Electronics Module (CEM). 

To reach the ETCLink Functions menu, press [Setup] [9] [Enter]. The 
following display appears:

Summary of Contents for Insight 2x



































































































































































































































































































































































































Reviews:

No comments