Working with Moving Light (ML) Fixtures
19
Step 6:
Specify the DMX512 Start address by pressing
[#] [Enter] [#] [Enter]
, where the
first number entered is 1, 2 or 3 to set the output port, and the second number is
1-512 for the DMX512 Start address for the first (or only) selected fixture.
Step 7:
If the fixture requires a remote dimmer, press
[#] [Enter]
, where the number is
the DMX512 address for that dimmer. If there is no remote dimmer, press
[Enter]
to skip over this column.
Step 8:
Press
[1] [Enter]
to swap the pan and tilt attributes on a fixture. This is useful
when the hanging position of a fixture makes the pan movement look more like
tilt, and vice versa. If you do not want to swap the pan and tilt attributes, press
[Enter]
to skip this setting.
Step 9:
The Flip setting inverts the movement of pan and/or tilt movement for a fixture.
Press
[Enter]
to skip, or
[1] [Enter]
to flip the pan movement. Press
[Enter]
to
skip, or
[1] [Enter]
to flip the tilt movement. Flip is useful when the hanging
position of a fixture causes the pan or tilt of a fixture to move opposite other
fixtures, such as when moving-mirror fixtures are hung head-to-head.
Fixture Box
When a fixture is selected, a special window called the Fixture Box appears at the bottom
of the Command display. All channels belonging to a particular fixture and assigned to
encoder control are displayed in five encoder pages.
Operating in the Fixture Box:
• Scroll through fixtures
Press
[+]
or
[–]
• Scroll through attributes
Press
[
s
]
or
[
t
]
• Scroll through attribute pages
Press
[
u
]
or
[
v
]