Disk Operations
17
Disk Operations
When you write to a diskette, both the show programming and the console’s configuration
are stored to the diskette. However, you may read show and configuration information
separately from a showfile stored on diskette. Reading these two components separately
allows you to conveniently keep system configuration preferences the same, such as
default settings and hardware setup, even when you run different shows.
Insert a 1.44 MB high density diskette into the console’s disk drive, then proceed as follows
to write to or read from the diskette.
Write to diskette:
Step 1:
Press
[Setup] [3] [Enter]
to view the Disk Functions menu.
Step 2:
Press,
[1]
[Enter] [Enter]
to write the show to diskette.
Read only the show information:
Step 1:
Press
[Setup] [3] [Enter]
to view the Disk Functions menu.
Step 2:
Press
[2] [Enter] [Enter]
to read show data from the diskette.
Read only the configuration information:
Step 1:
Press
[Setup] [3] [Enter]
to view the Disk Functions menu.
Step 2:
Press
[3] [Enter] [Enter]
to read system configuration from the diskette.
To format the diskette:
Step 1:
Press
[Setup] [3] [Enter]
to view the Disk Functions menu.
Step 2:
Press
[4] [Enter] [Enter]
to format the diskette.
Read all data from diskette:
Step 1:
Press
[Setup] [3] [Enter]
to view the Disk Functions menu.
Step 1:
Press
[5] [Enter] [Enter]
to read all data from the diskette.
