Recording
15
stays active before fading itself down. A dwell time of “Hold” will keep the effect
running until the next cue is played.
Step 3:
Press
[Record] [Enter]
to save your changes.
Change an effect step’s timing:
Step 1:
Press
[Blind]
to enter the Blind display.
Step 2:
Press {Cue}
[#] [Enter]
to select the effect cue you want to edit.
Step 3:
Press
[S1 - Step] [#] [Enter] [S7 - More Softkeys] [S3 - In/Dwell/Out][
x
]
[Enter] [
x
] [Enter] [
x
] [Enter]
, where
the first time number entered is for the in
time, the second is for the dwell time and the third is for the out time. Any of the
three can be skipped by pressing
[S3 - In/Dwell/Out]
without following it with a
number. The dwell time is the amount of time the step stays active before fading
itself down.
Step 4:
Press
[Record] [Enter]
to save your changes.
Effect Attributes
You can change the way an effect plays by changing its attributes. Effects are either
Positive or Negative but can have other attributes as well (for example, Reverse, Bounce
and Random).
Change an effect cue’s attributes:
•
Press
[Blind]
{Cue}
[#] [S7 - More Softkeys] [S8 - Attribute]
, and select from the
softkeys. To remove an attribute, press the corresponding softkey again.
