12
Inspire Station Programming Guide
Program Mode for Space Combine
Program mode behaves in a slightly different manner when the 4 button station is set to
space combine mode.
Step 1: Press and hold the
[Record / Program Mode]
button for three seconds to enter
Program mode. The “Mode” LED illuminates (steady amber) and the first space
combine button LED flashes the current (first) space controlled. (For example, if the
first combined space pair is space 3 & 4, the button LED will flash 3 times.)
Step 2: Push any station button to increase the starting space combine pair number by one,
the count always begins at space 1. The station will update the LED indication,
flashing the LED to reflect the new starting space pair number. (For example, pushing
the station button eight times will set the first combined space pair for the station to
spaces 8 and 9). All station combined space pairs will be consecutively assigned to the
controls beginning with the specified count.
Step 3: When the desired space combine pair is set, press and release the
[Record / Program
Mode]
button to save the new setting. The “Mode” LED turns off and the station
LEDs will display the new setting before returning to normal operation.
Function Switch for Space Combine
Note:
To change the space combine pair assignment to a lower number than what is
currently set, exit Program Mode then reenter Program Mode and the count will
restart at 1.
3 & 4
4 & 5
5 & 6
6 & 3
The Function switch affects how the last button behaves. When the station is set
to Preset control, the spaces will wrap, meaning the last button on the station will
combine with the first space configured for control on the station.
When the
position is set to “Preset”, the last button on the
station will combine the last space with the first space assigned to the station.
3 & 4
4 & 5
5 & 6
6 & 7
When the
position is set to “Zone”, the last button on the station
will combine control for the next sequential space.
