Operation
69
Operation From Home Status Screen (Studio Stand-alone)
When operating without an external control signal, the intensity of the white light can be adjusted
immediately and directly by pressing the UI buttons on the fixture while on the home screen. In this
setup, all the UI buttons change their functions from other setups. Icons on the screen indicate which
buttons to use for the settings.
When fixtures are connected together and there is no control signal, all adjustments that you make on
one fixture are automatically made on the connected fixtures.
Figure-4.44 Studio Status Home screen (Vivid, Lustr+, Series 2 Lustr, and Studio HD)
• To adjust the Intensity, select it in the menu and press [
] and then [
] or [
]. The range is
0 to 100%.
• To immediately set the Intensity to 0, press the [
] button. Pressing it again will return it to the
previously-set Intensity.
• To adjust the White Point,
select it in the menu and press [
] and then [
] or [
]
.
The range
is 2700 to 6500K.
• To adjust the Tint, select it in the menu and press [
] and then [
] or [
].
Pressing [
] increases magenta and [
] increases green.
• To return to the Main Menu, press [
].
• To return to the Studio status screen from the Main Menu, press [
].
Studio
Intensity
:
System OK
STUDIO MODE
4/5 Intensity
WhitePoint:
3200K
80%
100%
Tint: