Operation
47
LED Settings
Use the LED Settings menu to adjust fixture performance. From the LED Settings menu, you can set the
following:
• Output
• Curve
• Output Frequency
• Red Shift
• White Point
Figure-4.10 Selecting LED Settings on the Advanced Menu
Output
Use Output to choose the optimal balance between two competing performance parameters,
maximum brightness and output consistency, by adjusting:
• How much the fixture limits the overall power to the LED array
• How the fixture reduces output as internal fixture components heat up during use or in high
ambient temperatures
The output options are as follows.
R e g u l a t e d
Regulated is a moderately constrained power or brightness with consistent output under typical use.
Power to the LEDs is separately regulated in order to maintain consistent brightness during the initial
fixture warm-up period. This is recommended for most indoor applications.
P r o t e c t e d
Protected provides the most consistent output possible with the greatest potential for reduced overall
brightness. This is best for changing environmental temperatures, and applications with high
requirements for consistency in extreme operating conditions.
B o o s t
Boost provides the brightest possible output, with least guarantee of consistency. This is best for
applications with low duty cycles, loose brightness requirements, or where ambient temperature is
low.
1:
On the Advanced Menu, scroll to LED Settings.
2:
Press [
].
3:
With Output selected, press [
] to toggle between the options.
4:
Press [
] or [
] to commit the option.
LED Settings
Output
: Regulated
Curve: Standard
Output Freq:
1200
Red Shift:
Off
White Point:
3200K
Advanced Menu
DMX Settings
LED Settings
Presets and Sequences
Diagnostics
Local Settings
Copy All Settings