60
Source Four LED User Manual v1.8.0
Quick Color (excluding Daylight and Tungsten)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This feature
overrides any presets or sequences previously selected and is only available when there is no external
DMX signal to the fixture. For a list of available colors, see the table on
page 52
.
1:
Scroll to Quick Color within the Presets and Sequences screen.
2:
Press [
].
Figure-4.29 Selecting Quick Color on the Presets and Sequences Menu
3:
Scroll to Color and press [
].
4:
Press [
] or [
] to select the desired color
5:
Press [
] to commit the selection.
6:
Scroll to Intensity and press [
].
7:
Press and hold [
] or [
] to adjust the fixture’s intensity.
8:
Press [
] to commit the selection.
• To set the Intensity to 0, press the [
]. Pressing [
] a second time will return the fixture to
its previously set Intensity.
• If power to the fixture is lost while in Quick Color mode, the fixture will return to the Quick
Color menu once power is restored.
Note:
Exiting the Quick Color menu will return the fixture to the state it was in before
entering the menu.
Presets and Sequences
Focus: Off
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active
Quick Color
Intensity
:
100%
Color:
–––