ETC Installation Guide
ColorSource CYC v1.7/v3.1
4. Press the Mode button to start the update process.
•
The display alternates between
Udt
and the percentage complete
while updating.
•
The display blinks once to indicate that the update is complete.
5. Reconnect DMX In on the fixture.
Restore Factory Defaults
Press and hold the Mode button, Up button, and Down button
simultaneously for 5 seconds. The DMX start address will blink once to
confirm that defaults have been restored.
Error Codes
There are three error codes that may be shown on the user interface.
•
CAL
: Screen toggles between
CAL
and
Err
to indicate a problem
with the color calibration. The fixture will need to be returned to
the ETC factory; contact your local dealer to set up a repair.
•
OtP
: Screen toggles between
OtP
and
Err
to indicate that the
fixture has gone into over-temperature protection mode to avoid
damaging the fixture. Once the fixture has self-cooled, the error
will automatically clear. If the error does not clear, contact
ETC Technical Support (visit
).
•
No App
: Screen toggles between
no
and
APP
to indicate that the
upgraded fixtures have a software issue. Reload software to clear
the error. If the error persists, contact ETC Technical Support (visit
).
Clean the Fixture
If necessary, clean the mirror and diffusion surface with a blast of oil-
free air or wipe with a clean, lint-free cloth. Isopropyl alcohol, distilled
water, or a 50%-50% mixture of each can be used to clean the surface.
Specifications and Reference
For current and complete compliance and specifications, see the
ColorSource CYC datasheet at
Environment
The ColorSource CYC operates in ambient temperatures of 0°C–40°C.
The ColorSource CYC is for indoor use only.
•
Maximum recommended ambient operating temperature:
Ta = 40°C (104°F)
•
Maximum anticipated external surface temperature at 40°C
ambient: Tmax = 110°C (230°F)
•
External temperatures after 5 minutes of full-brightness operation
at 25°C (77°F) ambient: 49°C (119°F)
•
External Temperature (steady state achieved) at 25°C (77°F): 88°C
(190°F)
ColorSource CYC
Page 10 of 12
ETC
