User Manual
15
Change a PAR lens
Replace lenses if they become cracked or badly scratched.
Remove a lens
1:
Place the fixture on a flat, stable
work surface. Do not remove or
install lenses with fixture hanging.
2:
Rotate the lens rotation ring so that
the spring clip is at the top of the
unit, aligned with the color frame
retaining clip. See figure at right.
3:
Tilt the front of the fixture down at
least 45°.
4:
Press the spring clip with your finger
to release the lens. See figure at
right.
5:
Allow the lens to drop forward from
under the clip.
6:
When the lens drops, remove your
finger, allowing the lens to slide
forward until it rests on the lens
catchers. See figure at right.
7:
Carefully remove the lens.
CAUTION:
Never operate the fixture without a lens in place.
WARNING:
Unplug the fixture and allow it to cool down before
attempting to change a lens.
Tabs
Spring clip
aligned with
retaining clip
Spring
clip
Lens
catchers
