12
Source 4
WRD
PAR or PARNel
Set up the fixture
Set the angle within the
yoke
1:
Loosen the yoke locking knob.
Do not remove the knob.
2:
Tilt the fixture to the desired
position.
3:
Tighten the yoke locking knob
to secure in position.
Use the color frame
The color frame holder is equipped
with a spring-loaded retaining clip
that prevents color frames and
accessories from falling out.
1:
Release the retaining clip by pushing it sideways while gently pulling
backwards.
2:
Insert the color frame.
3:
Lock the retaining clip by pushing sideways while gently pushing
forward.
Loosen the Z-adjustment
knob
Turn the Z-adjustment knob toward PEAK
until the knob is loosened. This sets the LED
light source into the appropriate position
within the Source 4
WRD
PAR or PARNel
fixture. After the knob is loosened, no
additional adjustments are needed. See
Install Source 4
WRD
LED
on
page 8
for
more information.
WARNING:
Make sure all color frame accessories are locked in
position with the retaining clip before hanging the
fixture.
Yoke locking
knob
Retaining
clip
Z-adjustment knob
