ETAS
Getting Started
ES921.1
-
User Guide
25
6.2.2
Attaching the Front Panel of the ES910 Extension Slot
To attach the front panel of the ES910 extension slot:
1. Position the front panel in front of the extension slot of the
ES910 module.
Align the back of the front panel with the front of the housing
of the ES910.
2. Use the screws the ES921.1 was attached with to screw on the
front panel.
3. Tighten the four screws on the front panel of the ES910 mod
-
ule.
The ES910 and the front panel are now mechanically con
-
nected.
CAUTION
Damage to the ES910 possible!
The ES910 module must not be stood on its back when the front panel is
being attached.
The mounting screws of the extension slot must not fall into the module.
