ETAS ES5321.1, User Manual

Page: 5 / 42

ES5321.1 PWM I/O Board (48/32-CH) - User’s Guide 5
ETAS Introduction
1 Introduction
This manual contains the description of the ES5321.1 PWM I/O Board (48/32-
CH).
This chapter contains information about the following topics:
• "Properties" on page 5
• "Basic Safety Notices" on page 9
• "Identifications on the Product" on page 14
– "CE Mark" on page 14
– "RoHS Conformity" on page 14
– "KC Marking" on page 15
• "Product Return and Recycling" on page 15
• "Declarable Substances" on page 15
• "About this Manual" on page 16
1.1 Properties
The ES5321.1 PWM I/O board features 48 input channels and 32 output chan-
nels, which can all be configured as PWM or digital I/O channels. In particular,
the following signals can be generated or measured:
• Measuring signals with frequencies up to 100 kHz (on up to 48 channels)
• Generating signals with frequencies up to 100 kHz (on up to 32 channels)
• Generating multi-pulse signals with up to eight different period lengths
and duty cycles (on up to four channels).
• Generating signals based on the SENT specification (on up to 16 channels)
• Measuring signals based on the SENT specification (on up to 4 channels)
CAUTION!
Some components of the ES5321.1 can be damaged or destroyed by
electrostatic discharges. Leave the add-on card in its transport pack-
aging until it is installed.
Only remove, configure and install the ES5321.1 at a workplace that
is protected against electrostatic discharges.
CAUTION!
If cards (e.g. for startup or calibration) are unlocked but not com-
pletely removed from the housing, then they have to be pulled out so
far that the distance between the respective card and the backplane
of the housing is at least 1 cm! Otherwise, it may lead to contacts
between the cards and the backplane which could lead to damages.