ETAS
Getting Started
ES441.1 - User Guide
71
Connecting with Additional Modules
Several ES400 modules can be fastened to the other component with the con
-
nection type described in this chapter if you connect all modules to be attached
first with each other step by step (see chapter 6.2.2 on page 61). The module
which is the furthest to the right of the module block is subsequently connected
with the ES4xx angle bracket (right) as a single module and fastened to the DIN
rail using screws.
Connecting the ES4xx Angle Bracket with the DIN Rail
Connecting the ES4xx Angle Bracket (right) with the DIN rail
1. Place the ES4xx angle bracket onto the DIN rail.
2. Insert the hooks of the ES4xx angle bracket into the upper part
of the DIN rail.
3. Engage the ES4xx angle bracket in the DIN rail by pressing on
the ES4xx angle bracket or the module.
The module connected with the ES4xx angle bracket is fas
-
tened to the DIN rail.
6.2.7
Attaching ES400 Modules to Other Components Using
Cable Fasteners
Fig. 6
-
12
Openings for Cable Fasteners in ES400 Modules
Every module base has openings for two cable fasteners each on the right- and
left-hand side (see Fig. 6
12 on page 71). Just use cable fasteners to quickly
attach the modules to other components in the test environment in the imme
-
diate proximity of the measuring points.
NOTE
If a module is screwed onto the other component, no additional modules can
be screwed onto this module-component connection.
CAUTION
When assembling the modules, observe the admissible temperature range of
the cable fasteners used!
