32
33
17 Alternative seat heights/angles
Seat height and angle are set according to section 7, ”Settings
seat”. The castor wheels should not be replaced in order to
change the height or angle of the seat, but should be selected
solely with respect to driving technique and environment.
Seat height with seat tilted back +3°
(Etac Comfort Seating)
D
C
B
Fork
Castor
wheel
24" 22"
20"
D
44 cm
42 cm
40 cm
C
46.5 cm
44.5 cm
42.5 cm
B
49 cm
47 cm
45 cm
24"
22"
20"
7"=
175x45 mm*
6"=
150x30 mm
5"=
125x30 mm
5"=
125x30 mm
5"=
125x30 mm
------------
6"=
150x30 mm
------------
6"=
150x30 mm
24"
22"
20"
7"
6"
5"
6"
5"
6"
5"
Note the position in which each castor wheel is to be
mounted. Incorrect mounting has a negative effect on
operating conditions, as the front fork mountings are
not adjustable on Next Comfort. The bar must be in the
horizontal position.
Dimensions and tol/- 2%.
Dimensions from the ground to upper edge of
the unpadded seat.
Seat cushion 6 cm, unloaded.
At 0° seat angle, the dimensions in the table
are reduced by 2 cm.
At -3° seat angle, the dimensions in the table
are reduced by 4 cm.
D
C
B
24" 22"
20"
D
46 cm
44 cm
42 cm
C
48.5 cm
46.5 cm
44.5 cm
B
51 cm
49 cm
47 cm
Dimensions and tol/- 2%.
Dimensions from the ground to upper edge of
the seat frame.
Seat cushion 6 cm, unloaded.
At 0° seat angle, the dimensions in the table
are reduced by 2 cm.
At -3° seat angle, the dimensions in the table
are reduced by 4 cm.
Seat height with seat tilted back +3°
(settable cloth upholstery)
(!) Non-standard combinations are
available: Several rear wheels and
castors. Contact customer service.
*Can not be used on short frame chair with rear wheel
in position D.
