28
14:12 Cane holder, mounting
• Loosen the screws that hold the
anti-tip bar. Fit the cane holder. Fit
the screw and tighten.
• Thread the elastic strap ’double’
around the stick to make a loop.
The tip of the stick may have to be
removed to allow you to attach the
elastic.
14:10 Positioning belt
The positioning belt is in two parts, is
adjustable in length and has a snap-
lock. It can be fitted to the back joints
or in the holder on the side of the
frame.
(!)
Ensure that the user does not
slide forwards in the seat as this
can lead to the belt impairing
the supply of blood to the hip/
waist area.
The belt is to be used only for
positioning in the wheelchair.
It must not be used as a substi-
tute for a car safety belt.
14 Assembly instructions accessories
14:11 Cross brace, backrest
A cross brace can be fitted to the back-
rest for extra stability.
It is recommended for high and/or rear-
leaning backrests.
The cross brace is fixed to the push
handles and can easily be removed
using the snap lock.
The cross brace must be uncou-
pled if the chair is to be folded.
• Place the stick in the holder and
stretch the elastic loop over the
push handle.
Tools: 5 mm Allen key.
Check the function of the anti-
tips.
14:13 Spoke guards
The spoke guards prevent your fingers
from becoming entangled in the spokes
and also give some protection against
splashing.
They come in three sizes, corresponding
to our rear wheel dimensions.
Fitted without tools using the plastic
components supplied.
