16
17
9 Settings backrest/headrest
9:3 Backrest angle
The backrest angle is continuously set-
table.
Loosen the screw on the inside of the
backrest joint. The brake cable can be
angled down for better access.
Adjust to the required angle and
tighten.
9:1 Backrest
The backrest is settable in height and
angle and has adjustable back pad or
settable cloth upholstery.
The push handle is height adjustable.
Risk of tipping! Always check
the position of the anti-tips after
adjusting the backrest.
9:2 Backrest height
The backrest is infinitely settable.
Loosen the screws on the inside of the
back tubes by 2-3 turns. Adjust the
height by pulling/pushing the backrest
upwards/downwards.
If the height is adjusted with the back
pad removed or the chair is equipped
with settable cloth upholstery, ensure
that both back tubes are adjusted
equally by checking the height against
the straight edge on the rear of the
backrest.
Tighten the screws securely.
Tools: Allen key 5 mm
Tools: Allen key 5 mm
Risk of tipping! Always check
the position of the anti-tips after
changing the backrest angle.
9:4 Back pad (ECS)
The contour of the backrest upholstery
is individually adjustable by using Velcro
straps.
Loosen all the straps and ensure that
the user is sitting as far back in the seat
as possible.
Tighten the straps so that they follow the
contours of the back and give support
for the curve of the back.
Risk of tipping! Always check
the anti-tips after adjusting the
backrest upholstery.
