16
8 Settings legrests
The footrests are continuously angle-
adjustable and have two alternative
depth settings.
Angle: Loosen the screws (C) 1/2-3/4
turn. Angle the footrest to the required
position and tighten the screws.
Tools: 5 mm Allen key
D
8:6 Footrests, height adjustment
The footrests are adjustable in height.
Loosen the locking handle (A) on the
legrest fully. Remove the screw (B).
Set the height.
Replace the screw and handle.
Tighten securely.
With standard attachment tube:
Max. length: 51 cm. Min. length: 33 cm.
With extended attachment tube:
Max. length: 61 cm. Min. length: 46 cm.
With short attachment tube:
Max. length: 41 cm. Min. length: 31 cm.
8:7 Footrests, angle and depth adjustment
Depth: The attachment tube (D) is
secured to the footrest 1/3
from the front edge. By chang-
ing the left side for the right
they will extend further for-
wards. Pull out the footrest
and attachment tube, turn it
180° and secure it to the other
legrest tube. Adjust the foot-
rest angle.
Tools: 5 mm Allen key
(to adjust the footrest angle)
A
B
C
8:5 Footrests
Next Comfort
is supplied with divided,
flip-up footrests that are adjustable in
height, angle and depth.
To make the footrests lower or higher
than standard, they are available with
respectively 10 cm longer and 8 cm
shorter attachment tubes.
For outdoor use the footrests
should be raised 4-5 cm above
the ground.
Never stand on the footrests
as you may tip the chair.
