Etac Molift QuickRaiser 205, Technical Manual

Page: 48 / 54

47
Molift QuickRaiser 205 / www.etac.com
Safety checklist after Service and Repair
Article no.:
...........................................................................................
Serial no.:
...........................................................................................
Production Year:
...........................................................................................
Owner:
...........................................................................................
Number of lifts to next service:
...........................................................................................
Service/Repair performed
Service:
PCB battery changed
Lubricated cog wheel
Lubricated leg spread mecanism
Repair:
Replace PCB
Replace fuse
Replace coin battery
Replace plastic cogwheel
Replace control panel bottom cover
Replace motor 1
Replace rubber end stop
Replace trolley
Replace ball screw (driveline)
Replace rubber band
Replace emergency stop switch
Replace castors
Replace castor pivot pin
Replace trolley
Replace trolley
Change wheel/castor size
Replace motor 2 / Leg spread mechanism
Replace legs / sliding block
Other (Repair):
...........................................................................................
...........................................................................................
Physical examination
Test FUNCTION and check for wear.
All checkpoints must be checked of
to approve lifter for further use.
Perform 1 lifting cycle with the weight of
a person (minimum 50kg/110lbs). Brake
shall not slip, and the lifter shall have no
abnormal sounds.
Emergency stop, activate and reset switch.
Hand control (all buttons).
Control panel (all buttons, excluding electri-
cal emergency lowering).
Check tools for emergency lowering
Leg opening mechanism.
Brake on castors.
Charger and battery
Accessories:
...........................................................................................
...........................................................................................
Visual examination
Visual examination of load bear-
ing structure to make sure there
is no damage, cracks, frays or
deformation. All checkpoints must
be checked of to approve lifter for
further use.
Product labels
Plastic covers
Hand control and control panel
Cables and other electronics.
Rubber profile (on column)
Leg opening mechanism
Lifting arm and composite hooks
Lifting arm connection (remove cover)
Visible weldments on welded parts
Performed by
Periodic inspection should be performed by a
person who is certified by Etac education.
Date/Place:
...........................................................................................
Signature:
...........................................................................................
Etac Molift Service ID (6 digits):
...........................................................................................