Etac Molift QuickRaiser 205, Technical Manual

Page: 3 / 54

2
Molift QuickRaiser 205 / www.etac.com
General
Product Identification
The Product labels barcode contain product ID,
serial number and production date.
QuickRaiser 205
Art. no.
Gross weight:
249kg / 549lbs
SWL 205kg / 452lbs
24VDC 7A, IP24
Duty cycle 10%
2 min. on /18 min. off
Etac AS
Etac Supply Gjøvik
Hadelandsveien 2
NO-2816 Gjøvik NORWAY
www.etac.com
Battery and Service indicator
The lifter has two indicators.
Wrench symbol /
Service indicator
Battery symbol /
Battery indicator
The electrical system has a power-save function
which will turn off the electrical system five
minutes after last operation.
All indicators will turn off. The system is activated
when pushing one of the operating buttons
Battery indicator
When the multi level battery indicator is yellow
the lifter will have sufficient power available for
one full lifting cycle with max load. When battery
is flashing yellow it is only possible to lower the
lifting arm.
Service indicator
The lifters electronics record the weight lifted and
number of lifts. After a certain period of operation
a signal is given to indicate that service is required.
Service indicator (from 01.01.2018)
Service light Mode
No light No service needed
Green flashing Order service
Yellow Periodic inspection
required
Red Perform service
Service indicator (up until 31.12.2017)
Service light Mode
No light No service needed
Yellow Order service
Yellow flashing Periodic inspection
required
Red Perform service
Periodic inspection
Periodic inspection of the hoist should be
undertaken at least once a year to ensure that the
device operate properly and safely.
Service Scope
Service is needed when service indicator displays
red after calculated 10 000 lifts with max load
(SWL).
Authorized service personnel can use the Molift
Service Tool to take readings of the lift’s data and
number of lifts.
Service involves replacing the coin cell battery (see
page 27) lubrication of cogwheels and leg opening
motor screw (see page 42) and inspection/replace-
ment of worn parts. This must be carried out by
authorised personnel.