40
CONVAID USER’S GUIDE
The optional wheelchair transport model has been crash tested and
complies with the requirements of RESNA WC4:2012 Section 19 and
ISO7176-19:2008.
Rodeo
Model RD12T
30 kg
Model RD14T
45.5 kg
Model RD16T
75 kg
To reduce possibility of injury, the head support must always be used
with the chair.
The following instructions should be followed to minimize impact in
case of crash:
1. Chair must be forward facing. All non-essential accessories
removed except when medically necessary.
2. Use only a tested, proven and compatible 4-point wheelchair
tiedown system, and a 3-point occupant restraint system
(WTORS) in accordance with WC4-18 or ISO 10542-1.
3. The wheelchair tiedowns must be securely attached to the
four black anchor points on the chair. See arrows in above
photo for anchor points.
4. The occupant restraints must include a lap and shoulder belt,
secured directly to the Rodeo frame and side or roof of the
vehicle.
5. Wheelchair restraint manufacturers’ instructions must be
followed precisely to ensure intended performance.
NOTE:
Do not overtighten as this may cause damage to the frame.
CAUTION:
Convaid
belts and shoulder
straps are for
positioning only and
are not to be used as
a vehicle restraint.
1. All floor tiedown straps must be drawn tight in the front and the back to eliminate any forward/
backward movement of the chair.
2. Wheelchair restraint manufacturers’ instructions must be followed precisely to ensure intended
performance.
NOTE:
Tray, storage basket, canopy and oxygen tank bag must be removed during transport in bus or
van, except when medically necessary.
NOTE:
Convaid recommends the use of all Transit Required Accessories during transportation in a
motor vehicle; which include the H-harness with 3-point pelvic belt (used for positioning) and Headrest
Extension. (only applicable to E1232)
Transit Models
Transit Option
