Etac Convaid Rodeo, User And Service Manual

Page: 15 / 60

11
CONVAID USER’S GUIDE
Fig. 12 Fig. 14 Fig. 15 Fig. 13
CAUTION : Make sure the safety lock clicks into place. Two clicks will be heard. Fig. 14
Unfolding the Chair
Fig. 7
1. Lay chair down with seat facing upward. Fig. 7
2. Unbuckle closure strap. Fig. 8
3. Push in gray buttons on leg rest extensions and swing them out and upward until parallel with
the ground. Fig. 9 & 10
4. Open folded footplate and attach calf support to footplate with Velcro
®
. Fig 11
Fig. 8
Fig. 10 Fig. 11
Fig. 9
5. Apply wheel lock. Fig. 12
6. Push in gray buttons on push handle, and lift upward until handle is at a 90-degree angle with
the chair. Fig. 13
7. Place foot on the caster tube and push against back tubes using both hands. Make sure the
safety lock clicks into place by visual inspection on both sides. Fig. 14 & 15
NOTE : Look to see that safety lock pins are visible and fully exposed on both
sides. ( Fig. 15 )