eta PelletsCompact PC33, Installation Manual

Page: 42 / 76

42 www.eta.co.at
Dismantling the boiler (if required) Installation
The boiler's circuit boards are located behind it.
Fig. 9-8: Circuit boards
9.3 Dismantling the boiler (if
required)
The boiler can be dismantled for placement
The boiler can be dismantled if the spatial conditions
require it. Only in that case are the following steps
necessary. Approx. 2 hours are needed for the
dismantling and subsequent reassembly.
If the boiler is not dismantled, assembly
continues with step
9.4 "Draught fan" .
Removing the internal cover
Remove the cover behind the boiler door.
Fig. 9-9: Cover
Removing the cover from the front
Remove the cover from the front of the boiler.
Fig. 9-10: Cover
Removing the cover above the pellet hopper
Remove the cover above the boiler's pellet hopper.
Fig. 9-11: Cover