Cleaning and maintenance
Maintenance (expert)
21
Fig. 2-50: Position switch
Check the idle position of the sliding rakes
A screw is located on every sliding rake drive wheel
which actuates the position switch for the idle position
of the sliding rakes.
Fig. 2-51: Screw for the position switch
Through the maintenance opening on the top,
check whether the sliding rakes lie flush against
the bottom stop in the idle position.
Fig. 2-52: Idle position
Installing the panels
Reinstall the panels on both sides on the bottom of the
precipitator.
Fig. 2-53: Panel
Fig. 2-54: Panel