Pneumohydraulic controller HP 036./HP 037.
Page 2/16 BEA--206006-EN-04
1. Safey
1.1 Approved applications
1.2 Operating instructions
1.3 Mounting
The E+L controller HP 03.. must only be used to operate a hydraulic
positioning device.
Only use the controller
- if it is in perfect condition technically
- in accordance with its intended usage
- with an awareness of safety and risk factors and in compliance
with the operating instructions.
Any jobs regarding controller operation, gearing to production re-
quirements, conversion, setting, its safety-related mechanisms, servi-
cing, maintenance and repair must be performed by qualified person
-
nel only. Please observe the switching on/off procedure laid out in the
operating instructions.
Look after these operating instructions carefully and make sure they
are available to personnel at all times.
The operating instructions are part of the package and should be
read carefully prior to mounting, operation and maintenance work.
Please observe the locally applicable and customary safety and acci-
dent prevention regulations.
Hydraulic and pneumatic lines should be installed so that they do not
present any risk. There should be no bending (minimum bending ra-
dius 50 mm for lines supplied by E+L).
Operating elements that are a potential risk when pressure is redu-
ced, e.g. bursting of the hose or motor standstill, should be appropri-
ately safeguarded by the user.
Please ensure that:
- electrical components without enclosures such as switch panels
or operating devices are protected according to the locally appli-
cable safety regulations, e.g. VDE 0100
- when laying electrical leads the customer shall ensure that the in-
sulation is not damaged and that leads are correctly secured and
screened
- controller power is switched on along with the main machine sys-
tem switch
- the controller is integrated into the machine control in such a way
as to prevent it starting up independently after a machine standstill
or an emergency OFF device reset.
The controller should be operated by qualified persons or suitably in
-
structed personnel only.
1.5 Operation
Main switch on
your machine
L 1
1-pole illustration
Controller
HP 03.. electric
control
1.4 Installation
