6
4.2. Technical Data
SignalPilot
Input voltage
12V - 20V DC power supply
12V - 16V AC power supply
Digital track voltage
Outputs
16 Transistor outputs
Rated at 1.5A (2.5A for 100ms)
Short-circuit and overload-protected
Maximum output Total maximum current 2A (2.5A for 100mS)
Feed-back inputs
Not available
Operating modes DCC „Accessory Decoder” with RailCom® (addressing according to RCN-213). Turnout numbers 1 - 2048.
Märklin® Motorola® Turnout numbers 1 - 256.
Up to 16 turnout numbers (SANs) for signal aspects.
Separate turnout number for global blanking.
Separate turnout number (address) for POM programming.
Configuration
With ESU LokProgrammer and LokProgrammer software
Dimensions
86mm x 86mm x 25mm
4.3. Scope of delivery
The SignalPilot is supplied with 5 removable terminal blocks (1x
4-pole for the track connection, 2x 8-pole for the outputs, 1x
2-pole for GND and 1x 4-pole for U+) as well as this operating
manual. A pack of replacement terminal blocks is available from
ESU under the part number 50095.SP.01.
Technical Data
